The Hain Company

Leonard Hain, a long time machine and equipment inventor, manufactures innovative truss and wall panel equipment that speeds production and reduces labor costs.

  • Powered (1 Phase) Measuring System
  • Inches System (21 Stops at 10" Centers)
  • 15' Roller Conveyor with Stands
  • Reconditioned in December 2020
  • Board Sizes: 2x4 and 2x6
  • Motors: Two 1 HP / 220 Volt or 440 Volt / 3 Phase
  • Saw Blades: 7 1/4" Carbide Tipped (set at 45 degrees)
  • Angle Adjustment: Manual Rotation with Air Brake
  • Air Supply: 90 PSI
  • Carriage: Steel Rails with Steel Dual V Rollers
  • Pedestal: 3/16" Formed Steel
  • Saw Housing: 1/2" Billet Aluminum
  • Covers: 10 Gauge (1/8" thick) Steel
  • Fully Enclosed for Safety
  • Adapts to Any Saw
  • Left or Right Hand Operation
  • Feet & Inches System (Stops at 12" Centers) or Inches System (Stops at 10" Centers)
  • Motor: 1/4 HP Linear Actuator (110 Volt)
  • Stop Rail: 2 x 4 x 1/4" Aluminum Extrusion
  • Stops: Jig Bored Steel
  • Stop Blocks: Machine Billet Aluminum
  • Optional Lengths from 5' to 60'
  • Add $390.00 for Gang Stop
  • Add $1,200.00 per 10' Section of Roller Conveyor with Stands
  • Add $300 for Crating 
  • Process TJI or any other extended length material up to 60'
  • Adapts to any saw
  • Motor: 1/4 HP Linear Actuator (110 Volt)
  • Air Supply: 90 PSI
  • Stop Rail: 2 x 4 x 1/4" Aluminum Extrusion
  • Retractable Stops: Jig Bored Steel
  • Stop Blocks: Machined Billet Aluminum
  • Racking System: Aluminum Stops Mounted on Precision Rod
  • Board Sizes: 2x4 and 2x6
  • Motors: Two 2 HP / 220 Volt or 440 Volt / 3 Phase
  • Saw Blades: 7 1/4" Carbide Tipped (set at 45 degrees)
  • Angle Adjustment: Manual Rotation with Air Brake
  • Air Supply: 90 PSI
  • Carriage: Steel Rails with Steel Dual V Rollers
  • Pedestal: 3/16" Formed Steel with Powder Coat Finish
  • Saw Housing: 1/2" Billet Aluminum
  • Covers: 10 Gauge (1/8" thick) Steel with Powder Coat Finish
  • Fully Enclosed for Safety 
  • Drill 1, 2, 3 or 4 Holes
  • Produce in excess of 360 Vent Blocks per Hour
  • Block Sizes: 2x4 through 2x12 on center, 2x14 & larger off center
  • Adjust the block size in 15 seconds or less
  • Board Clamping
  • Motor: Heavy Duty 5 HP / 230 or 460 Volt / 3 Phase
  • Air Supply: 100 PSI
  • Drills: Four 3 Wing Carbide Tipped Cutters (7 second cycle time)
  • Spindles: Alloy Steel - Double Ended
  • Blanchard Ground Spindle Plate
  • Frame: 2" Steel with Powder Coat Finish
  • Fully enclosed for safety (cover can be easily removed for maintenance)
  • Covers: 10 Guage (1/8" thick) Aluminum
  • Dimensions: 60" Wide, 33" Deep, 60" High
  • Drill Studs for Electrical Wire in Wall Panels
  • Heavy Duty 5 HP / 230 or 460 Volt / 3 Phase
  • Motor carriage bearing & spindle assembly mounted on Blanchard ground steel plate
  • Lineal motion is hardened & ground V bearings & rails
  • Block Sizes: 2x4 through 2x12 (infinite height setting to center)
  • Air Supply: 100 PSI at 10 CFM
  • Drills: 2 Wing 3/4" Carbide Tipped (can accommodate smaller or larger)
  • Spindles: Alloy Steel (polished & ground precision shafting)
  • Frame: 2" Steel with Powder Coat Finish (fully enclosed for safety) 
  • Covers: 10 Guage (1/8" thick) Aluminum (cover can be easily removed for maintenance)
  • Dimensions: 33" Wide, 33" Deep, 60" High
  • Shipping weight: 750 Lbs (including crate)
 
Subscribe to RSS - The Hain Company