Monet DeSauw

Monet DeSauw manufactures a variety of saws from simple push button operation to top of the line servo driven automated saws. Founded in 1992, the product evolved from the popular DePauw component saw manufactured in the 1970's.

  • Automated (Wall Panel Software Download) or Semi-Automated (Touch Screen Entry) Operation
  • Comprehensive Set-up Screens
  • All Movements are Computer & PLC Controlled
  • Servo Controlled Pusher for Accurate Lengths
  • Up Cut Saw with 22" Blade
  • Cut & Mark 2 Boards from 2x4 to 2x12 up to 20' in Length
  • Ink Jet Printing (on the edge) - optional face printing is available
  • Lumber Optimization (using software generated pick list & sawyer defined "fill" boards)
  • Outfeed Table
  • 480 Volt / 3 Phase - 40 Amp
  • Add $550 for Spare Blade
  • Add $23,000 for 20' Live Deck with Double Stack Feature
  • Three Operating Modes: Auto (Design Software Download), Semi-Auto (Touch Screen Input) & Manual (Push Button with Scales)
  • (1) 30" and (4) 16" Saw Blades cut from 18" to 20'
  • Pneumatic Blade Brakes
  • Lumber Hold Downs
  • Vibrating Waste Conveyor (under saw)
  • Incline Waste Conveyor (adjacent to saw)

Cut-Off/Shaper Unit
 5 HP Saw to Cut-Off Angles
 25 HP Cutter Head to Shape/Fingerjoint Ends
 Shape up to (8)2x4's or (5)2x6's
 480 Volt / 3 Phase / 60 Amp
 Extra Finger Jointing Knives ($1,700 Value)
 
Glue Station
 Apquip Glue Applicator & Valve
 6 Gallon Glue Pot
 110 Volt / 1 Phase / 15 Amp
 Extra Glue ($600 Value)
 
Finger Joint Press
 Hydraulic Press for 2x4 and 2x6 Material
 Internal Cut-Off Blades for 8' & 9' Studs
 480 Volt / 3 Phase / 20 Amp
 
Add Finger Jointing Test Equipment for $6,500
 
Advantages
 Reduce Waste
 Save $$ on Disposal Fees
 Earn Profit on Waste Material
 Recycle Scrap Material (Positive Impact on Environment)
 Reduce Warping (Produce Straight Studs)

EQUIPMENT FINANCING available from SLS Financial Services

NEW SINGLE TOOL PANEL BRIDGE ONLY (FOR EXISTING FRAMING/SQUARING TABLES)
Programmable Fastener Patterns with PLC Touch Pad Entry
Bridge Auto Return
Bridge Tilt at Sheathing Seams
Laser Pointer
Buyer to Select Color
Includes Installation Supervision

EQUIPMENT FINANCING available from SLS Financial Services

  • Touch Screen User Interface with Backup Mechanical Controls
  • 3 Operating Modes: Auto, Semi-Auto & Manual
  • All 20 Axes of Movements are Computer & PLC Controlled
  • Comprehensive Setup Screens Display Each Piece with Setup Data
  • Anti-Collision & Optimizing Programming
  • Auto Calibration
  • Productivity & Time Tracking
  • Maintenance Diagnostics
  • Variable Speed Conveyor (0-50 Flights per Minute)with Powered Hold Downs
  • (1) 30" x 80 Tooth Blade (27 3/4" Scarf on PAE)
  • (4) 16" x 40 Tooth Blades (13 1/2" Scarf on Centerline)
  • Pneumatic Blade Brakes on all 5 Blades
  • 16 1/2" to 20' Length Capacity (11" Minimum on Square End Blocks)
  • Vibrating Waste Conveyor Under Saw - Add $1,500 for Belt Waste Conveyor
  • 480 Volt / 3 Phase
  • Includes 4 Day Onsite Installation & Training
  • Add $2,300 for Extra Set of Blades
  • Add $3,700 for Incline Belt Waste Conveyor
  • Add for Optional Live Deck, Label Printer, Ink Jet Printer & Catcher Display
  • Add $28,000 for Servo Controlled Saw
  • Heavy Duty 5 or 6 Chain Lumber Feed System (Compatible with Most Component Saws)
  • 16' Wide x 20' Long x 36"(+or-4") High
  • 12 Adjustable Legs with Swiveling Feet
  • Sumitomo 3 HP Gear Motor with Cycloidal Reducer (97% Overall Efficiency)
  • Auto Feed Control
  • Foot Pedal Override (Forward & Reverse)
  • Variable Speed Control
  • Sort Start & Soft Stop Controls
  • Safety Shutoff Cable at Perimeter & Emergency Stop at Control Panel for Safety
  • 5 Chain Model Transfers 6' to 20' Lumber (20,000 Lb Capacity) - $20,000
  • 6 Chain Model Transfers 3' to 20' Lumber (25,000 Lb Capacity) - $21,000
  • Heavy Duty Double Bearing Construction
  • Lumber Stop on Both Ends
  • Optional Side Tables & Popup Tables
  • Automated (Truss Design Software Download) or Semi-Automated (Touch Screen Entry) Operation
  • All Movements are Computer & PLC Controlled
  • Comprehensive Setup Screens Display Each Piece with Setup Data
  • 22" x 40 Tooth Blade on PAE
  • Cut 1 or 2 Boards up to 20' (2 Second Plunge Cut)
  • 4" Minimum (w/4 Angles), 1/2" Minimum (Blocks)
  • Cut Chords, Webs, Rafters, Wedges & Stair Stringers
  • Cut Long Scarfs by Multi-Plunging
  • Servo Positioning on Infeed, Angle & Outfeed Pusher
  • Over Travel Protection
  • Matthews Ink Jet Printer
  • Lumber Optimization Program
  • Belt Waste Conveyor
  • 480 Volt / 3 Phase / 60 Amp
  • Includes 5 Day Onsite Installation & Training
  • Add $550 for Spare Blade
  • Add $3,700 for Incline Waste Conveyor
  • Add for Optional Infeed Deck, Bunk Feeder & Double Stack Unit

FRAMING TABLE
Lengths to 16' (additional length available in 4' increments)
Powered Height Adjustment (8' to 12' wall heights)
Pop-up Skatewheel Conveyor
Fixed Squaring Stops
Excludes Tool Dollies

MONET DESAUW PANEL BRIDGE
Programmable Fastener Patterns with PLC Touch Pad Entry
Bridge Auto Return
Bridge Tilt at Sheathing Seams
Laser Pointer

One 110 Volt / 20 Amp Connection Required

OPTIONS
Add $3,200 for Stud Locators at 16" & 24" O.C.
Add $2,250 for Handle Bar Router
Add $1,500 for Wall Panel Lift (Excluding Hoist)
Add $1,750 for 1 Pair of 15' Skatewheel Conveyor with Stands
Add $8,250 for Sub-Component Layup Tables with Pop-up Skatewheel Conveyors

Includes Installation Support in the United States & Canada
EQUIPMENT FINANCING available from SLS Financial Services

SQUARING TABLE
Lengths to 16' (additional length available in 4' increments)
Powered Height Adjustment (8' to 12' wall heights)
Roller Conveyor & Squaring Stops

MONET DESAUW PANEL BRIDGE
Programmable Fastener Patterns with PLC Touch Pad Entry
Bridge Auto Return
Bridge Tilt at Sheathing Seams
Laser Pointer
The Panel Bridge shown in the photos and video is over a Framing Table

OPTIONS
Add $2,250 for Handle Bar Router
Add $1,500 for Wall Panel Lift (Excluding Hoist)
Add $1,750 for 1 Pair of 15' Skatewheel Conveyor with Stands
Add $8,250 for Sub-Component Layup Tables with Pop-up Skatewheel Conveyors

Includes Installation Support in the United States & Canada
EQUIPMENT FINANCING available from SLS Financial Services

  • Cut-Off/Shaper Unit with 5 HP Saw to Cut-Off Angles & 25 HP Cutter Head to Fingerjoint Ends
  • Delta 2 Bag Dust Collector
  • Glue Station with Apquip Glue Applicator & 6 Gallon Glue Pot
  • Hydraulic Finger Joint Press with Cut-Off Blades (2x4 and 2x6 Lumber)
  • 480 Volt / 3 Phase
  • Save $$ on Disposal Fees, Earn Profit on Waste Material & Produce Straight Lumber
  • Add Finger Jointing Test Equipment for $6,500

EQUIPMENT FINANCING available from SLS Financial Services

Pages

 
Subscribe to RSS - Monet DeSauw