Mark 8 / Mark 10 System
(1) Mark 8 mono-press with boom and hydraulic pump (last used 7/19/2023)
(1) Mark 10 mono-press with boom and hydraulic pump (last used 7/19/2023)
(1) Lot of power chords
(42) fully operational Mark 8 / Mark 10 tables
(1) 100' of electrical feed rail

Mark 8 Pedestals  *All Mark 8 tables are modified to work with the Mark 10 C-clamp press
(2) oversized Mark 8 splice tables
(1) Mark 8 peak table
(2) Mark 8 splice tables, convertible to web tables
(8) Mark 8 web tables
(4) double wide Mark 8 web tables

Mark 10 Pedestals
(2) large Mark 10 heel tables
(4) Mark 10 heel tables, convertible to web tables
(2) Mark 10 peak tables
(17) Mark 10 splice / web tables

(18) Non-operational tables (magnets may still work)
(1) Mark 10 peak table
(1) Mark 8 peak table
(6) double wide Mark 8 web tables
(10) Mark 8 web tables

Extra presses
(1) Mark 10 C-clamp, repacked, no platen
(1) Mark 10 boom with motor, no pump, no C-clamp press
(2) Mark 10 C-clamp press heads, used, no rams, no platens

Misc parts
(1) Mark 10 pump, used but good
(1) Mark 8 pump, used but good
(1) Mark 8 ram, used, pitted
(2) Mark 8 platens - used
(3) drive sprockets
(1) trolley wheel
(3) splice table assembly brackets for Mark 8 or Mark 10
(3) heel table bottom limit bars
(3) heel table top clamps, 1 needs repair
(28) chord stops
(21) web stops
(76) steel bars for holding plate boxes on the side of tables
(1) lot of feed rail parts
(1) lot of C-Clamp packing parts
(1) lot of misc parts

Manuals / Tools
(2) HYDRO-AIR Mark-10 Mono-Press Installation and service manuals
(1) Mitek / HYDRO-AIR Mark-8 Mono-Press Installation and service manual
(1) Mitek Mono-press Repacking Service manual
(1) set of C-clamp repacking tools

** I-Beam support and steel flooring is NOT included.